Business Type : Manufacturer, Supplier
Product Details
| Model | JIDC75 |
| Drive | Left Hand |
| Column Structure | Double Column |
| Diameter of Column | 370 |
| Weight | Appr 4000 Kgs |
| Locking System | Manual --separate Lock for Arm Radial Movement and Arm Up-down Movement |
| Lifting Nut | Gun Metal - 100 Mm Long |
| Spindle Quill / Ram Movement | In Cylinder Liner Bush |
| Spring | Heavy Duty Compression Spring |
| Drill Head Movement | By Rack & Pinion On Bearings & Rollers |
| Drilling in MS | 75 |
| Drilling in C.I. | 80 |
| Rough Boring in M.S. | 150 |
| Tapping in M.S. | 58 |
| Spindle Taper | MT-5 |
| Spindle Travel | 330 |
| Spindle Speed | 12 Steps |
| Diameter of Ram (quill) | 90 |
| No. of Spindle Speeds | 12 (all 12 Speeds Through Gears Only and Not By 2 Speed Motor) |
| No. of Autofeed | 6 |
| Range of Autofeed (mm/rev) | 0.13-1.10 mm/rev. |
| Max Min Spindle Nose to Base | 1135 / 395 |
| Vertical Travel of Arm | 740 |
| Max / Min Dist. Of Spindle center to column | 1800/800 |
| Horizontal Travel of Arm | 1500 |
| Machine Measurement | 2200 x 1000 x 2515 |
| Drill Head Motor | 5 HP / 960 RPM / Flange Mounted |
| Elevating Motor | 3 HP / 960 RPM / Flange mounted |
| Box Table | 560 x 460 x 400 |
Preferred Buyer From
| Location | Anywhere in India |
