Product Details
| Drive | Left Hand |
| Column Structure | Double Column |
| Diameter of Column | 330 |
| Weight | Appr 3600 Kgs |
| Locking System | Manual -separate Lock for Arm Radial Movement and Arm Up-down Movement |
| Lifting Nut | Gun Metal - 100 Mm Long |
| Spindle Quill / Ram Movement | In Cylinder Liner Bush |
| Spring | Heavy Duty Compression Spring |
| Drill Head movement | By Rack & Pinion On Bearings & Rollers |
| Drilling in MS | 63 |
| Drilling in C.I. | 70 |
| Rough Boring in M.S. | 120 |
| Tapping in M.S. | 50 |
| Spindle Taper | MT-5 |
| Spindle Travel | 300 |
| Spindle Speed | 12 Steps |
| Diameter of Ram (quill) | 90 |
| No. of Spindle Speeds | 12 (all 12 Speeds Through Gears Only and Not By 2 Speed Motor) |
| No. of Autofeed | 6 |
| Range of Autofeed (mm/rev) | 0.13-1.10 mm/rev. |
| Max Min Spindle Nose to Base | 1135 / 395 |
| Vertical Travel of Arm | 740 |
| Max / Min Dist. Of Spindle center to column | 1700/700 |
| Horizontal Travel of Arm | 1100 |
| Machine Measurement | 2055 x 1000 x 2490 |
| Drill Head Motor | 5 HP / 960 RPM / Flange Mounted |
| Elevating Motor | 1 HP / 960 RPM / Flange mounted |
| Box Table | 560 x 460 x 400 |
Safety:
